0.2mm Equipment Wire (100m)

(Black, Red, Green, Brown, Blue, Orange, Pink, Grey, Purple, Yellow, and White)

Product Code: E016-E019

Product Details

A high quality wire to for general interconnection within apparatus. Comes in Black, Red, Green, Brown, Blue, Orange, Pink, Grey, White, Purple, and Yellow. Ideal for use with low voltage lights, signals, motors (including point motors) etc. 7/0.2mm tinned copper conductor. Overall diameter 1.2mm. Rating 1kV rms. 1.4A at 70°C.

0.1mm Equipment Wire (10m)

(Black, Red, Green, Brown, Blue, Orange, Pink, Grey, Purple, Yellow, and White)

Product Code: A22020-A33030

Product Details

A high quality wire to for general interconnection within apparatus. Comes in Black, Red, Green, Brown, Blue, Orange, Pink, Grey, White, Purple, and Yellow. Ideal for use with low voltage lights, signals, motors (including point motors) etc. 18/0.1mm tinned copper conductor. Overall diameter 1.2mm. Rating 1200V rms. 1.5A.

Expo - EZE-Wire Solderless Extension Cables

Product Code: 28072 - 28073 - 29073

Production Details:

Each pack is supplied with the appropriate heat shrink and all cables is16 strand multicore for low resistance. One end has male spade connector, other end is female - use to extend the EZE-Wire point motor harness, or connect to pre-wired switches. 1 Metre and 3 Metre length available.

Gaugemaster - Point Motor Wire (Red/Green/Black) - 10m Tripled

Product Code: GMC-PM51

Production Details:

10m of Red/Green/Black tripled wire. Ideal for model railway point motor use and helpful when trying to keep wiring tidy.

Gaugemaster - Red / Black Twinned Wire 10m

Product Code: GM09RB

Production Details:

10m of Red/Black twinned wire. Ideal for model railway use and helpful when trying to keep wiring tidy.

Train-Tech - Pre-Wired Toggle Switch Terminal Pack (6)

Product Code: TTCON12

Production Details:

These easy to use easy to fit connectors allow quick solderless connection to a variety of common switches. This pack contains 6 x pre-wired push fit connectors with 1m wire attached (2 x Green, 2 x Black, 2 x Red) enough for 2 point motor switches. These can be used on any standard mini-toggle switches (E027, E028, E029, E030).

Noch - Wire Clips

Product Code: N60180

Production Details:

The NOCH Clips ensure a tidy model railway layout. Simply stick or nail under the layout and pull the cable. Pack of 20.

Automatic Wire Stripper

Product Code: E110

Product Details

A self-adjusting wire end stripping tool combining wire stripper, wire cutter and crimp tool in one easy-to-use tool. Jaws clamp the cable firmly in position whilst blades strip the insulation from the end of the cable in one simple operation.
• Automatically adjusts to cable diameters from 0.2 to 6.0mm²
• Strips single, multiple, round, flat or figure eight cable
• Heat-treated alloy-steel construction
• Crimps insulated and non-insulated terminals 10 to 22 AWG (1.5 to 6.0mm²)
• Crimps ignition terminals 7 to 8mm
• Comfortable PVC grip handles, Overall length 205mm, Weight 255g

Solderless LED Holder

Product Code: E071

Product Details

A novel LED holder with 200mm leads pre-stripped and tinned which simply clips to the rear of the LED and is retained in position by a patented clamping device. The holder will significantly reduce assembly time and ideal if soldering is a problem. Dimensions 14.5 x 2.6mm.

2AA Battery Holder with Battery Clip

Product Code: A21010

Product Details

2AA battery holder moulded in black thermoplastic. Suitable for a wide range of applications. Voltage when fitted with 2AA batteries is 3Volts. Includes Battery Clip

4AA Square Battery Holder with Battery Clip

Product Code: A21011

Product Details

4AA battery holder moulded in black thermoplastic. Suitable for a wide range of applications. Voltage when fitted with 4AA batteries is 6Volts. Includes Battery Clip

4AA Long Battery Holder

Product Code: E013

Product Details

4AA battery holder moulded in black thermoplastic. Suitable for a wide range of applications. Voltage when fitted with 4AA batteries is 6Volts. I have successfully used this to power my 5V LED's.

PP3,PP6 Battery Clip

Product Code: E014

Product Details

Twin battery snap to suit PP3 and PP6 type 9V batteries. For use with the battery 4AA holder to allow for its removal or disconnection from your components.

Grey ABS Enclosure

Product Code: E099 and E100

Product Details

Plastic ABS Project Box in a light grey colour. Includes rubber feet. Ideal for making a as a signal / points control panel (pictured right).

Large - 175 x 124 x 38mm - E099

Small - 92 x 57 x 25.4mm - E100

Stripboards

Product Code: E081 and E093

Product Details

Fully pierced stripboard used for prototype and development work. I use these when converting a Loco to DCC from DC.

E081 Small - 25 x 64mm (9 X 25 Holes)

E093 Medium - 64x94mm (24 X 37 Holes)

Copper Adhesive Tape (25m)

Product Code: EX22081

Product Details

Copper Self Adhesive Tape. Size: 5mm x 25 Meters. Ideal for wiring Dolls Houses, Model Railway Coaches etc. Can be soldered. Expo recommends the use of 77595 super flux gel for best results. 

3 Amp Terminal blocks

Product Code: E073

Product Details

For connecting wires without the need for soldering.

Pluggable Terminal Strips (8mm 6A)

Product Code: E072

Product Details

Pluggable industrial quality terminal strips. Matching male and female supplied in 12 way lengths and can be cut to size.

I have used these to transfer power between my modular Railway layout.

12 Way Terminal Blocks - Pack of 5 (3 or 5 amp)

Product Code: A23020 (3 amp) A23021 (5 amp)

Product Details

For connecting wires without the need for soldering.

Test Leads (50cm Long) - Pack of 10

Product Code: 23050

Product Details

Set of 10 Test Leads, each lead is 50cm long with plastic insulated miniature crocodile clips at each end. Max current 0.5A Ideal for testing circuits prior to final soldering.

Miniature Crocodile Clip

Product Code: E022 (Red) E023 (Black)

Product Details

A range of miniature insulated crocodile clips supplied with covers. Red or Black crocodile clip. Great for testing circuits making temporary or semi permanent connection
• Solder termination complete with cable grip
• Overall length 33mm

Crocodile Clips Pack of 2 (Red and Blue)

Product code: A23012

Product Details

A pair of miniature insulated crocodile clips supplied with covers. One red and one blue crocodile clip included. Great for testing circuits making temporary or semi permanent connection
• Solder termination complete with cable grip
• Overall length 30mm

Micro Spade Connectors and Heat Shrink Pack of 10

Product code: A23000

Product Details

Pack Containing 10 Male and 10 Female micro spade connectors with the appropriate heat shrink. Female spade connectors will fit PECO point motors.

4mm Plug - Pack of 4 (Red and Black)

Product code: A23060

Product Details

Pack contains 2 red and 2 black plugs.

4mm Socket - Pack of 4 (Red and Black)

Product code: A23062

Product Details

Pack contains 2 red and 2 black plugs

Gold Plated Plugs and Sockets - 0.8mm - 2 Pairs

Product Code: A21140

Production Details:

Expo Tools 2 pairs of 0.8mm Micro Plugs & Sockets. Gold Plated. Supplied with suitable heat shrink.

15 Way HD plug and Socket

Product Code: E020 (Plug) E021 (Socket)

Product Details

Suitable for making multiple connections across boards. Buy a socket and plug to make a connection. Will require soldering.

Expo Tools 9 / 15 Way Covers

Product Code: A23032

Product Details

Pair of 9 Way Black Covers, if using covers one is required for each Plug or Socket. For use with E020 and E021 15 Way HD plug and socket.

Red Crimp Tap Splice (Suitcase Connector)

Product Code: E130

Product Details

Red self-stripping tap splice connector. Tap splice is placed over existing wire, the additional wire inserted and the connector then crimped with pliers.
• 0.8 to 2mm² wire size, • Brass contact material, tin contact plating, • 3.68mm internal diameter, • Suitable for insertion of additional cables, •
600V voltage rating, • 22 to 18 AWG

Crimp in-line Fuse holder

Product Code: E015

Product Details

The in-line fuse holder (Automotive style) is placed over the existing cable and then crimped. Automotive style fuses can then be inserted.