PECO Lectrics - Model Railway Electronics

PECO Lectrics - Turnout Motor

Product Code: PL-10

Production Details:

The PL series of Turnout Motors is tried and tested, over the last 40 years we have sold literally millions of these motors. Simple, reliable and good value. Requires a rectangular hole 40mm x 24mm when clipped directly to the underside of a Peco Turnout. Use the PL-12 / PL-12X if above baseboard mounting is required; attaching PL-13 and PL-15 switches will enable switching for automatic polarity etc.

PECO Lectrics - Turnout Motor with Extended Operating Pin

Product Code: PL-10E

Production Details:

The PL series of Turnout Motors is tried and tested, over the last 40 years we have sold literally millions of these motors. Simple, reliable and good value. An extended drive pin is fitted, use the PL-9 Mounting Plate to attach this unit to the underside of the baseboard. Attaching PL-13 and PL-15 switches will enable switching for automatic polarity etc.

PECO Lectrics - Side Mounted Turnout Motor

Product Code: PL-11

Production Details:

Clips directly into a Peco OO/HO Setrack Turnout, either Left or Right Hand. No holes to drill, and this unit is pre wired. Can also be used with 00/H0 Streamline Turnouts.

PECO Lectrics - Turnout Motor Adaptor Base with Over Centre Spring

Product Code: PL-12

Production Details:

This unit enables a PL-10 Turnout Motor to be mounted on the surface of the baseboard, an optional extension arm is also included. A removable over centre spring is fitted, useful for turnouts which do not have this feature.

PECO Lectrics - Accessory Switch (Turnout Motor Mounting)

Product Code: PL-13

Production Details:

Attaches directly to the PL-10 family of Turnout Motors with contact adhesive. This single pole switch can control frog polarity, ground signals etc. PL-31 Spade Connectors can be used to attach wires to these units without the need for soldering.

PECO Lectrics - On/Off Switch

Product Code: PL-22

Production Details:

Single Pole On/Off Switch. Use this to control features such as lighting circuits, or as a section switch where only 1 controller is used.

PECO Lectrics - Single Pole Changeover Switch (On/On)

Product Code: PL-23

Production Details:

Single Pole On/On Switch. Use this to switch power from one device to another or for operating items such as 2 aspect colour light signals.

PECO Lectrics - Black Passing Contact Switch

Product Code: PL-26B

Production Details:

Provides the short burst of current required to operate the PL-11 and PL-10 series of Turnout Motors. The PL-31 Connectors are ideal for attaching the PL-34 Wiring Looms or PL-38 wire to these switches without soldering; the included Shrouds prevent current 'shorting out' between the terminals.

PECO Lectrics - Red Passing Contact Switch

Product Code: PL-26R

Production Details:

Provides the short burst of current required to operate the PL-11 and PL-10 series of Turnout Motors. The PL-31 Connectors are ideal for attaching the PL-34 Wiring Looms or PL-38 wire to these switches without soldering; the included Shrouds prevent current 'shorting out' between the terminals.

PECO Lectrics - Switch Console

Product Code: PL-27

Production Details:

Houses 6 PL-26 Passing Contact Switches, PL-22 On/Off Switches or PL-23 On/On Switches.

PECO Lectrics - Wiring Harness for PL-10 Series Turnout Motors

Product Code: PL-34

Production Details:

Makes wiring the PL-10 series of Motors quick and easy. Just a simple push fit onto the motor terminals; the other ends are tinned and ready for the PL-39 Terminal Block, PL-50 Switch Module Unit, or PL-31 Push on Terminal Connectors.

PECO Lectrics - Capacitor Discharge Unit

Product Code: PL-35

Production Details:

For use with all solenoid motors (e.g. PL-10 and Pl-11). Connect this unit to the 16v ac supply on your transformer. The capacitor stores up power and discharges a 'kick' to ensure turnout blades 'snap over' every time.

PECO Lectrics - Rail Cleaner

Product Code: PL-41

Production Details:

Abrasive rubber block for removing dirt and oxidisation from the rail surface. Improves running, particularly at low speeds.

PECO Lectrics - Locomotive Servicing Kit

Product Code: PL-71

Production Details:

Look after your model collection with this extremely useful kit, one handy pack has the things you need for basic cleaning and lubrication. The Kit contains Power Lube, Wheel Cleaning Brush and Scraper and the Locomotive Servicing Cradle which enables locomotives and rolling stock to be held safely during servicing, leaving both hands free. Suitable for OO / HO, N, and many narrow gauge locos. Suitable for all scales and gauges.

PECO Lectrics - Power Feed Joiners (Pack of 8)

Product Code: PL-80

Production Details:

PECO Power Feed Joiners for code 100 and 124 track. These 204mm track feed wires are ready soldered to rail joiners. Quick and easy to use, avoids the risk of damage to sleepers from soldering irons. Easily extended using PL-39 Terminal Blocks and PL-38 Red and Black wire. 4 pairs per pack. Technical Specification: Length: 204mm.

PECO Lectrics - Power Feed Joiners (Pack of 8)

Product Code: PL-82

Production Details:

PECO Power Feed Joiners for N-Gauge code 80 and 55 and OO9 / HOe code 80 track. These 204mm track feed wires are ready soldered to rail joiners. Quick and easy to use, avoids the risk of damage to sleepers from soldering irons. Easily extended using PL-39 Terminal Blocks and PL-38 Red and Black wire. 4 pairs per pack. Technical Specification: Length: 204mm. Please note: image shows PL-80.