Hornby DCC Sapphire Loco Decoder NMRA Compliant
Product Code:
R8245
Production Details:
Hornby DCC Sapphire Loco Decoder NMRA Compliant. ● Built
to conform to all relevant NMRA Standards, ● Auto Control: Allows for
locomotive to start and stop based upon internal Timer Functions, without
input from the controller. ● Directional and independent Lighting with
dimming and extensive special effects - Steady stat, Strobe, Flickering /
random fast flash and Steady Flashing, ● Simulation of water/fuel loads with
burn rate dependent on speed and operating parameters. ● Four function
outputs rated at 200mA each. Total current sum of function outputs = 500mA.
● Supports Standard (basic) and advanced Consist control. ● Short and Long
(extended) Addressing., ● Low speed gear for shunting operations. ● Support
for programming on the mainline (operations mode programming) as per NMRA
Standards. ● Provides I A continuous motor current, 1.5A stall. ● 21-pin
connector (8 pin converter supplied). ● Supports 1 Amp continuous current
with 1.5 Amp stall. low speed "gear" for shunting operations. Size: 23mm x
16.5mm x 6.5mm. Set amounts of "water" and "fuel" can be stored in the
Sapphire providing real time fuel consumption. Burn rates can be selected.
Discontinued